We have a CMOS camera connected to a DSP on 8-bit parallel bus with external sync signals. I want to make a video emulator as replacement of camera for developing environment. And for this I'm considering Advantiv EVAL-ADV7612-7511 Video Evaluation Board.
On EVAL-ADV7612-7511 evaluation board I want to do following. Please let me know if this is possible or not.
1. Take output of ADV7612 in raw digital video; 8-bit interface with external sync signals. BT-656 & Bayer format. [Input is from HDMI input A/B]
2. Give digital video input to ADV7511. Again 8-bit digital video, bayer pattern with external sync signals. [Output is to HDMI output]
Are jumpers available to directly access these lines? Please see attached image for details.
Please let me know if any better solution to this problem is available.