Dear ADI team,
I need a thermometer and analog signal window comparator with a trimmable range in my design.
Is there any chance to use the analog input of AD7418 instead of the temp sentor for the OTI pin interrupt?
Thank you in advance,
Apologies for missing this. Do I understand that you want to use the OTI pin interrupt to monitor AIN? If so, then no, the datasheet states that OTI "is set if the result of a conversion on Channel 0 (temperature sensor) is greater than an 8-bit word in the TOTI setpoint register." You might want to check the ADT7411. Its a 10-Bit, 8 Channel ADC with 10-Bit Temperature Sensor. The 8 single-ended analog input channels have VHIGH and VLOW limit registers.
Hope this helps.
Retrieving data ...