Is there is a reference design to connect AD9681 to (zynq ZC706 or Kintex7 or Virtex7 ML605) ???
Because the currently released AD9681 evaluation board has the Tyco connectors, it is difficult to connect to commercial FPGA boards.
There is a new AD9681 evaluation board in development that has an FMC connector, but this still a few months from release.
I'm sorry I do not have more for you.
Has Analog Devices released the AD9681 evaluation board with FMC connector ?
Planning to integrate AD96814 evaluation board with ZYNQ ZC706.
The design of the AD9681 evaluation board with FMC connector is complete and it is in the process of being transferred to production.
I do not know when the transfer to production will be complete. When are you hoping to obtain a board?
Thank you for your reply.
We are in a stage of finalizing our custom made FMC carrier board.
For the same, we need FMC pin-out, power-supply requirements (& reference design, if available) for AD9681 FMC board, so that we can plan the compatibility of AD9681 FMC with our FMC carrier board.
I put the schematic, Gerbers and BOM for the AD9681 board on the Wiki page: https://wiki.analog.com/resources/eval/ad9681-125ebz .
Scroll down to the "Design and Integration Files" section.
Please let us know what other information you need.
Thank you for your prompt support Dougl.
Will go through the same and get back to you soon.
Retrieving data ...