Using HDMI with 1080i 59. When switching sources from Component and back to HDMI, HDMI was not recognized and monitor was signaling that there was no signal. I had to resend scripts to ADV7511.
Whenever the ADV7511 is disconnected from a monitor (HPD is removed), it needs to re-establish the connection. This is done by reading the EDID, parsing that and then determining what best to send to the monitor. Even before that can happen, it has to be powered up via R0x41. I suspect that the scripts you are re-sending are performing the power up and it may be in a default mode that works.
ADV7511 is an HDMI transmitter. It's source is a pixel port. It has no component or HDMI input. This doesn't really make any sense.
Retrieving data ...