AnsweredAssumed Answered

[ADV728x-M] Can we use the AIN2 pin with connecting to the DIAG pin for the diagnostics?

Question asked by Tamu on Nov 8, 2016
Latest reply on Nov 10, 2016 by Tamu



I have a question about DIAG pin of ADV7281-M.

This question is related to the sled "".
I understood that "Figure 13" on the datasheet is the correct figure.
The diagnostic resistors are connected to "AIN1" on Figure 13.
I think "AIN2" can also be connected to the diagnostic resistors as long as the diagnostic resistors are placed before the 1.3 KOhm resistor.
Is my understanding correct?


Thank you !
Best regards.