Please provide a working example for SPI reception using DMA.
I had a quick check and there seems to already be an example on the DVD that comes with the evaluation board.
Have you had a look at that? Did you have issues with it?
Thank you for your attention. I don't have that DVD
You can download the contents of the DVD here,
Can't find that CD at that link
I said that the contents of the DVD are found there.
I.e. download all the files and folders from that link and that's exactly what's on the DVD.
It's not a DVD image file just the contents of the DVD.
The example inside ADuCMxxxV1.3.exe is only for transmiting (using DMA).
The slave example is for receiving, so you could use the 2 examples and combine them to make exactly what you are looking for.
You could also have a look at the ADuCM320 examples at the SPIDMA_Master example which has both TX and RX, but that's only for general guidance as it won't work directly on the ADuCM360.
If you have trouble with that and it doesn't work you can post your issues here and we will try to debug your issues, but the reason the library functions were written is that so we wouldn't have to write hundreds of examples for every specific scenario. It was the hope that with the libraries and the few example projects customer would be able to tweak then to suit their needs.
Retrieving data ...