Do you have some refernsdesign on AD2410-8 input according to surge 61000-4-5 (100A, 8/20uS), or good guidline. We work with a product in Powerline. Regards Alf
I can refer you to a reference design CN0067. This reference uses the AD7793 together with an Isolator ADUM5401. You may use this reference circuit as a starting point on your design.
If your application is on the power line monitoring. ADI has products designed for this application like the AD7606 and the AD7616 product family. These are multi channel 16 bit Analog to Digital converters with multiple input ranges and higher throughput rate. You can refer to the links for the details or check the ADI website.
Thanks for the support you give.
I can tell that we need TCLAMP 3302 and EMI-filter on all in/out put pin. Blocking diode and on diode for polarity revers on generator output.
Design Engineer Electronics/Project Manager
CREATOR TEKNISK UTVECKLING AB
SE-776 70 VIKMANSHYTTAN, SWEDEN
PHONE +46 (0)225-351 00 DIRECT +46 (0)225-351 38
This email and all attachments are confidential and may contain legally privileged and protected information intended solely for the use of the recipient(s) named above. If you have received this transmission in error, please notify the sender immediately and permanently delete this email and any attachments.
I am not familiar with the TCLAMP 3302. But if you want to discuss more details on your application design you can contact me on my email email@example.com. I can also ask some people in ADI to help on your application design solution.
Retrieving data ...