Has any work been done on the ZCU102 Ref design with the ADRV9371x Eval board ?
I am interested in building HDL project with Xilinx ZCU102 board(xilinx has open booking/ordering this board).
Please kindly, refer hdl design for same.
It will be on release 2016_r2 -- around March 2017.
ZCU102 is planned to be supported later, As of now supported FPGA plarforms can be found from below. ZC 706 is supported and Arria 10 SOC status is Work in progress (WIP)
Is any pre-release design available?
when we could expect support for ZCU102?(any timeline)
We have ZCU102 + DAQ2 HDL -- only basic testing around DAQ2-- other things UNKNOWN. We now need to go through these unknowns which is handled by our software team. After that we will port other designs to ZCU102. A rough estimate would be in mid 2017 on 2016.4 (by then I believe we will be out of ES2/Beta versions of the tools as well).
Alternatively, you can start with the DAQ2 design and port it to ADRV9371.
All you have to do is use the zcu102_base and adrv9371/zc706 board.
I expect it should be straight forward (except the base address remap) --
If you ran into trouble, let us know.
I had started with DAQ2 design and trying to port it for ADRV9371.
I am facing issue with axi_ad9371_dacfifo.
In daq2 design only dma is use for dac_fifo whereas in zc706 , pl ddr3 & dma used for dac_fifo.
I am getting mismatch error wrt to dac_rst and other signal.
Please suggest how to proceed?
I don't know if ZCU102 has a PL ddr-- if it does, port it, if it doesn't remove it and use the adc_fifo (BRAM).
Hi, Can you provide a pointer to where to find the zcu102_base SW?
Any update on release of AD9371 support on ZCU102 platform:
Still nothing on GitHub... can we have an update on the expected release date?
We missed the 2016_r2 as we still haven't got any boards with the production silicon.
Once we have the boards, we will be porting most of the designs to ZCU102.
As of now it seems to be 2017_r2 (as 2017_r1 is on its way).
Thanks for the info.
Still nothing on GitHub and also in 29 June 2017 release (2016_R2) ... can we have an update on the expected release date?
This week we plan to make the 2017_R1 branch and after that we start updating dev for 2017_R2 release. The plan is to make the 2017_R2 branch by the end of the year. Rejeesh is on vacation, he can probably give you more details next week.
Retrieving data ...