AnsweredAssumed Answered

AD9467-FMC-250EBZ reference design

Question asked by nerdler33 on Oct 14, 2016
Latest reply on Oct 17, 2016 by CsomI


I am in the process of building the AD9467-FMC-250EBZ reference design. Using vivado 2016.2, when I try to use the tcl file to build the project, I get the following error: 

ERROR: [BD 41-1075] Cannot create address segment for </axi_hdmi_dma/S_AXI_LITE/Reg> in </sys_ps7/Data> at 0x43000000 [ 256 ]. Range = 256. Memory ranges must be at least 4K.
ERROR: [BD 5-14] Error: running create_bd_segment.
ERROR: [Common 17-39] 'create_bd_addr_seg' failed due to earlier errors.

while executing
"create_bd_addr_seg -range $p_seg_range -offset $p_address $sys_addr_cntrl_space $p_seg_name "SEG_data_${p_name}""
invoked from within
"if {$p_index == 0} {
set p_seg_range [get_property range $p_seg_name]
create_bd_addr_seg -range $p_seg_range -offset $p_address $sys_addr..."
("foreach" body line 2)
invoked from within
"foreach p_seg_name $p_seg {
if {$p_index == 0} {
set p_seg_range [get_property range $p_seg_name]
create_bd_addr_seg -range $p_seg_ran..."
(procedure "ad_cpu_interconnect" line 69)
invoked from within
"ad_cpu_interconnect 0x43000000 axi_hdmi_dma"
(file "../../../projects/common/zed/zed_system_bd.tcl" line 271)

while executing
"source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl"
(file "system_bd.tcl" line 2)

while executing
"source system_bd.tcl"
(procedure "adi_project_create" line 97)
invoked from within
"adi_project_create ad9467_fmc_zed"


I have not done anything except for build the libraries required and ran the tcl file in the reference project. 

Any help understanding this error would be greatly appreciated. 


Thank you,