I am not using the CRC detection feature of the ADF7023 and I need an interrupt to tell me a packet has been received and the ADF7023 has finished receiving the packet and written the rx data to the packet RAM. Is such an interrupt available?
If CRC detection is disabled (CRC_EN = 0 in register PKT_LENGTH_MODE) then the INTERRUPT_CRC_CORRECT interrupt acts as an end of RX packet interrupt. If this interrupt is enabled, the ADF7023 asserts it when the received payload has been written to packet RAM and the ADF7023 has returned to PHY_ON.
Note that with CRC detection disabled the packet validation is based on sync word detection only.
Retrieving data ...