Can you help support the S parameters of ADL5382 RF/LO ports? Thanks!
With Z0 - 50 Ohms, here is the RF port matching:
and the LO port matching:
If you look at figures 17 and 20 of the datasheet, you can see the return loss at the RF and LO ports.
If you are looking to operate at a higher frequency range, I would recommend you use the ADL5380 (400MHz - 6GHz).
You may find that ADL5832 has poor return loss at low frequency as below figure.We wish get S parameter for low frequency matching.
OK and thanks for your help.
Retrieving data ...