I have HMCAD1520 board and I want to evaluate on SP601 board. I downloaded Easysuite and installed it.
Then I followed "easystack_xilinxsp601_userguide.pdf" document but I am unable to found "EasyStack.mcs" in the installation folder.
But I found "hmc1520_sp601_rev118.mcs" file in that folder. So I assume that this may be newer version of EasStack.mcs file. So I followed the rest of the steps and finally the LED on board start blinking. The issue is GPIO_LED0 is off which is opposite to this statement of the document "GPIO_LED0 should then be constantly lit". Also Easy_Suite shows couple of errors, I attached error pics in the end of the question.
My SP601 board Status after programming BPI Flash with the "hmc1520_sp601_rev118.mcs" file:
GPIO_LED0 = OFF
GPIO_LED1 = BLINKING
GPIO_LED2 = ON
GPIO_LED3 = ON
So if there is any other MCS file please let me know where from I can get it to test HMCAD1520 on SP601.