I have a question about ADv7281-M.
At datasheet , it doesn't say which pin is Digital I/O pin.
I think DIAG[1,2], I2C, RESET, PWRDWN, INTRQ, GPO[2:0], ALSB is DIGITAL I/O pin.
Is this all of them?
That section of the datasheet applies to the following pins.
Digital Inputs: SCLK, ALSB, RESET, PWRDWN
Digital Outputs: INTRQ, GPO 0, GPO 1, GPO 2
Digtial IO: SDATA
The section does not apply to the XTALP, XTALN, VREFP and VREFN pins.
The MIPI digital Output pins conform to the MIPI D-PHY specifications.
The Diagnostic digital input pins are tolerant to 1.8V. See "short-to-battery (STB) Diagnostics" for a description of the diag_slice level.
Senior Applications Engineer,
Analog Devices In.
Your question has been forwarded to the part specialist.
Thank you for your reply!
How about DIAG 1&2, pins ?
The Diagnostic digital input pins (DIAG1 and 2) are tolerant to 1.8V. See "short-to-battery (STB) Diagnostics" for a description of the diag_slice level.
Thank you for your reply.
Retrieving data ...