Referencing to ADV7611 software manual (register map) on the page 32 here are settings for 10-bit and 20-bit output formats.
OP_FORMAT_SEL[7:0], Address 0x03
0x01 10 - bit SDR ITU-656 mode
0x21 10 - bit 4:2:2 DDR mode
AVES 1.01 software with device "ADV7611.xml" confirm it. But when I apply this settings device still operates like 8-bit output mode.
I've found 10-bit bus data stream with the setting 0x04,0x05,0x06,0x07 and 0x24,0x25,0x26,0x27 accordantly but I not sure it is correct and
Is ADV7611 able to operate in the 10-bit and 20-bit output formats and what the registry settings have to be in this case.