AnsweredAssumed Answered

A problem about the internal Vref Of AD7667

Question asked by Lianglihua on Sep 6, 2016
Latest reply on Sep 11, 2016 by Lianglihua

Hello!

I am now using an AD7667  conversion chip, and I use  the internal reference voltage, the parallel model, but my output has been FF7F, through inspection , I found that the internal reference voltage on the pin of REF is about 0.3V, this means there is something wrong with the internal reference voltage. But my PD, PDREF PDBUF is low, SER/PAR set to high (that is in parallel model), using the model of IMPULSE . 

And after many inspections ,I am sure the circuit ,pin-strap,and the chip of AD7667 are all good.So what's the problem?

Thanks for your help

Outcomes