After my general questions about how to setup the ADV7611 I've done some testing.
The source video format is 720p50. I'm using the ADV7612 Evalboard. I want to output a 16-bit ITU.
My configurations are:
V_FREQ and PRIM_MODE 0x15
Register 0x02 has value 0xF5
Register 0x04 has value 0x62
Register 0x05 has value 0x20
Register 0x06 has value 0xAE
So I guess the basic configuration should be fine.
Now I took a look at the output signals. Attached are the measurements. As you can see, there are some gaps within the clock. They appear around every 500ms. Is this behaviour a normal one? If not what could case the clock to akt like this?
Beside this, does the other signals look like they are suppose?
I just want to make sure my configurations are fine and the output is as it should be.