When the following condition, what is added to lower 2 bit in ADV8005?
(00? or 11? or interpolated? or undetermined?)
HDMI input[4k2k-8bit] ---> down scale to 1080p ---> TTL output[10bit]
Do you have one of our evaluation board for ADV8005?
How do you configure the board either through script or through software driver?
Are you using any specific script to configure the board if you configure through script?
What is the VSP software driver version that you are using if you configure the board through driver?
The lower bits may start out as '00' but video processing may change these bits. I'm not sure why you want to go from 8 bit to 10 bits. You don't again any extra color information. Keep the 1080p at 8 bits.
Retrieving data ...