AnsweredAssumed Answered

Insuffiencient Power from DDS9959

Question asked by vikas_bel on Aug 6, 2016
Latest reply on Aug 12, 2016 by vikas_bel

I am using AD9959 DDS for frequency generation as well as modulation. I am using Serial mode. I am enabling all channel and writing common frequency to all channel. DDS is responding to frequency change but power level is coming -50dBm. After powering up the device, master reset is generated and only registers required for frequency is at the address x04 data is written. Same behavior is coming for two DDS.

Outcomes