The ADZS BF707 BLIP2 User Guide makes reference to 0-ohm resistors that can be used to measure power consumption of the DSP. Which resistors are these?
You can refer to page 58 of the same document and use either of these registers - R98 or R83.
Can you please clarify which section you are referring to? Are you referring to the ADZS BF707 BLIP2 Board Support package?
The ADZS-BF707-BLIP2 Board Evaluation System Manual states on page xii "0-ohm resistors for processor current measurement" as one of the features of the board.
I am looking at this and will post an update as soon as I get the details.
One last question. Would the proper approach to measure current through those points be to desolder the resistors and use a multimeter to bridge the connection?
Thank you very much for your help. That answers my question.
Apologies for the delay. Yes you need to desolder the resistors and then use a ammeter or multimeter in series to bridge the connection.
Not a problem, thank you for your confirmation.
Retrieving data ...