Please advise me again.
I read a ADN8833 datasheet. (Rev. A | Page 18 of 23)
Recommended capacitors is 10μF.
>A 10 μF ceramic capacitor rated at 10 V is the minimum recommended value.
>Increasing the capacitance reduces the switching ripple that couples into the power supply but increases the capacitor size.
When 10 μF was chosen, how much numerical value was substituted for Δ V, Vsw_out, Vin?
I'd like to know about the margin of the fixed number for a better design.
Would it be considered by the fixed number about the capacitance-voltage dependence?
Do I have to choose a bigger capacitor?