AnsweredAssumed Answered

Uboot doesn't start with reference design FMCDAQ2-EBZ

Question asked by PavelEng on Jun 19, 2016
Latest reply on Jun 20, 2016 by timh

I've downloaded the updated image from http://https://wiki.analog.com/resources/tools-software/linux-software/zynq_images and copied the files from the directory zynq-zc706-adv7511-fmcdaq2 to the main directory of partition BOOT. There's no boot process, there's even no Uboot log to the UART.

 

I'm using a Xilinx zc706 board with AD-FMCDAQ2-EBZ mezannine.

 

I tried compiling uboot, fsbl, u-image, and device tree but still no success (based on given system.bit). I also noted the link to the linaro release (http://releases.linaro.org/12.11/ubuntu/precise-images/ubuntu-desktop/linaro-precise-ubuntu-desktop-20121124-560.tar.gz) is broken, and there's no longer precise image.

I did succeed booting from SD with a bare metal image, using xilinx BIST reference design.

 

Can you suggest a solution for booting with the given image?

Also, can you provide an updated link for an ubuntu image for the design?

 

Thanks,

Pavel

Outcomes