I use ADV7280-m freerun scipt(480i) for ADV7280m kit. What virtual channel is set in this script(as I understand by default it should be vc zero)?
The Virtual Channel identifier is controlled by CSI map, register 0x0D bits 7:6.
By default these register bits are 0b'00. Therefore by default and in all ADI scripts the Virtual Channel identifier is set to 0b'00.
See ADV728x hardware manual for more information http://www.analog.com/media/en/technical-documentation/user-guides/ADV7280_7281_7282_7283_UG-637.pdf
Senior Applications Engineer,
Analog Devices Inc.
What do you want to try using virtual channel?
Did you read this Are Multiple Video Streams over Single MIPI CSI-2 Link Possible on the ADV728x ?
I just want to capture video from ADV7280-m(1 channel). I need to setup slave part of mipi-csi2(and other interfaces on imx6). For this reason I need to know what virtual channel is setupped by default in ADV7280m if I use free run script.
Curently I settuped vc=0 in imx6, but can`t get any interrupts in IPU module. So I need to be sure that ADV7280m use the same virtual channel
Retrieving data ...