Regarding to non-standard mode in ADV7441A, I have some question.
Our customer will use firstname.lastname@example.org(YPbPr:component) input format with ADV7441A.
But according to H/W manual (Rev.J), this format is not described in table 12 (page 40).
1) Will this format be supported in ADV7441A?
If so, do you have a Register setting Recommendation for it?
2) To support this format, is it possible that the customer will set manually to some PLL control registers?
(PLL Divisor / VCO Range / Charge Pump Current)