I want to know the settling time of 2ch of ADE7753.
Please tell me how to calculate from each register set.
Or tell the settling time if submit a register set?
Specifcally what are you trying to understand the settling time for?
For example, the IRMS register takes 219ms to settling to 95% of the final value with the intergrator off as is shown in the table below. The VRMS register will have similar performance.
This is mostly due to the HPF in the data path.
So If HPF is disable, how long dose ADE7753 of IRMS settling time?
Hi DlathOr, please tell me the bit length of the HPF.
Sorry for the delay, the settling time of the IRMS with the HPF disabled would be in the 10's of milliseconds but we don't have a more accurate like with the HPF enabled. Let me check with the design about a more accurate number for settling time and the bit length of the HPF, then get back to you.
Thank you for your answer.
I would also like to say about the bit length of the HPF.
The information about settling time turned out to be much harder to track down than expected.
What I found:
Thanks for your patience.
Retrieving data ...