After solving the issue with the ADV7611 input ADV7611 without any HPA and EDID , now I am having trouble with getting the image to PPI0 of BF609 ( custom board ) . I can detect the DVI input signals without any problems and I can see the 74.250 MHZ clock on the LLC which is connected to PPI CLK ( Vpp = 1.7V ). I cannot read the data in BF609.
What should I check to eliminate the hardware issue?
I have selected the EPPI0 in Pin Multiplexing tool. I am modifying the Video Decoder EI3 board frame capture example.
Thank you in advance,