Our customer asked how should we connect the not-used pins NIC(1,7,8), TEMP(3), TRIM(5).
Are they no-connect?
Otherwise they should be connected to GND?
Our customer is still waiting for this info. And he is pushing this.
Looking at the datasheet, if not used Trim and Temp should be no-connect. NIC is no internal connect - I'd typically connect those pins to ground as it will often give increased thermal performance but they could be left as no connect.
Thank you Tim !
I got it. I can transfer this to our customer with your good comment.
Thanks again Kaos
Retrieving data ...