Decoder extender board problem

Discussion created by jihen on May 2, 2016
Latest reply on May 5, 2016 by Jithul_Janardhanan



I have an ADS-BF609 EZ-board  rev 1.1 with ADSP_BF609 rev 0.2 BOM rev 1.4. To this board, I attached a video decoder extender board BOM rev 1.1. I am working with Crosscore 2.2 (latest one).


The capture is working fine only for three frames. Then no capture occurs.


I also tested the "Frame Capture" example under "Video_Decoder_EI3_Extender_Board-Rel1.1.0\Video_Decoder_EI3".

The same problem exists.


Do you have an example for frame capture under the above settings.