Form the USer guide there is the Subframe Timing Diagram and Stream Timing Diagram for the AES3 standard but how is the Stream Timing Diagram for the IEC 60958? For this option there is only the Subframe Timing Diagram.
Are you interested in uncompressed audio (IEC 60958) or compressed audio (IEC 61937)?
according to the SMPTE299M the AES3 subframe is composed by 32 bit in the same form of the "Figure 21. IEC 60958 Subframe Timing Diagram" in the Hardware user guide so i would like to know the timing diagram for this audio format if possible.
Does the ADV can output the audio data in this form (Preamble, DATA, V,U,C,P)?
If yes which is the relative timing diagram ?
Sorry for the delay. I am still checking with the ADV7612 expert.
For detailed timing - I'm afraid that you will have to refer to AES3 or IEC60958.
I will explain what is difference between Fig 21 and 23.
tfig. 21) the data will be biphase encoded (like SPDIF) and no LRCLK will be
required to align the frame to the start thanks to the sync preamble sent first.
The AES3 figure 23 is sent without biphase encoding and hence an LRCLK is
needed in the receiving end to correctly align the parallel data (like seen in figure 23).
We support both modes, if I2SOUTMODE is set to 'b11 AES3 will be sent out.
Hope this answers your question
Retrieving data ...