I have an AD9467-FMC-250EBZ card that contains the AD9517 clock reference. I am trying to get the AD9517 to lock to an external 10MHz clock and modified the board as follows:
1) Removed C209 and C210 and placed them on C304 and C305.
2) Installed shorts on C302, C303, C300, and C301.
3) Set the registers for A divider = 25, default settings for the rest of the 0x10 - 0x1D or per AD9517-4.pdf table 24 (bottom of page 30).
4) The chip seems to respond with a random output.
Is there a tool that can be used to help me set the PLL parameters properly?