i have problem to power up the eval board of ADF4355-2 ( with SDP-S controller board) as the screen prompt daughter board not detected. I had tried to reset and power up and power down - still not working
May anyone guide me what to do next?
I moved this discussion to RF and Microwave community.
Someone here would be able to assist you.
Can you try another SDP-S board....you should see a connection to the ADF4355-2 board, even if the ADF4355-2 is powered down ( no power) ... regards,
You could try reinstalling the SDP drivers from here: ftp://ftp.analog.com/pub/evalcd/SDPDrivers/
I had tried with the new software driver- still not working.
I suspect that your SDP-S board may be the issue, can you replace this board and try again, regards,
Retrieving data ...