The default settings on gyroscopes' output data of ADIS16448 are just in precision 0.01 deg/sec, how can I improve its precision up to 1e-8 deg/sec?
Thank you for confirming that you're referring to the digital resolution. Can you help me understand why you need 10,000 times better resolution than the in-run bias stability, which the industry seems to recognize as the practical limit to the resolution available in this type of sensor? Some improvement is available by averaging the data after you read it, while capturing the associated big growth, but that requires a trade off in bandwidth.
The 0.01 deg/sec is the digital resolution, not the precision. I am not aware of any way to achieve such a massive change in the digital resolution or precision in this unit, but thank you for posting.
Thanks for your reply, and the digital resolution is the problem I meant. Tor example, the accelerometers' outputs are 0.010829, 0.013328, 1.009596 for sensor-frame X, Y, Z axis respectively, while the gyros' output are 0.12, -0.32, -0.08 for each axis respectively.
Retrieving data ...