I see a switch, but cannot successfully download for standalone operation when self boot "enabled". Sigma 3.11
To download for standalone operation, first compile your project, then under the "Hardware Configuration" tab, right-click the processor in question, select the "Self-boot Memory" menu, then click "Write Latest Compilation through DSP". Once this is done, turn the self-boot switch to ON, and the board should self-boot on its next power up.
For more detailed information, take a look at pages 17 and 18 of this user guide: http://www.analog.com/media/en/technical-documentation/user-guides/EVAL-ADAU1452MINIZ_User_Guide.pdf
Hope this helps!
Retrieving data ...