I'm initializing the ADV212 using the parameters below. I'm using a 32-bit HIPI interface to transfer the data. After two 128-word transfers (each transfer is one pixel of 8-bit YCrYCb), the ADV212 no longer requests anymore data. The image size is 256x256. So, it appears after one row, there are no more requests.
From the forums, I found that I should program PMODE2. It is set to 0x30. The transfers are 128-bytes. 32-bit accesses. XTOT = 512. YTOT = 256. Codeblock is 64x32, with irreversible 9x7.
I've been using the ADV202_HIP_mode03 document as a guide, but have made some changes to the settings. I was hoping someone might have an idea of where to look in my settings to try and resolve this.
Here are the settings I'm using: