AnsweredAssumed Answered

Sigmastudio 3.11 and 3.12.4 beta export system files bugs

Question asked by Barricade on Mar 21, 2016
Latest reply on Apr 7, 2016 by Barricade

I checked the export system files function with the newest version with the same design.

Against my used version 3.8 I see different export bugs:

 

in xxx.params one section is doubled (3.11 and 3.12.4):

 

Cell Name     = Tone.Noise
Parameter Name= WhiteNAlgNew2mxx

Parameter Address = 22

Parameter Value   = 345675

Parameter Data :

0x00, 0x05, 0x46, 0x4B,

 

Cell Name     = Tone.Noise
Parameter Name= WhiteNAlgNew2mxx

Parameter Address = 22

Parameter Value   = 345675

Parameter Data :

0x00, 0x05, 0x46, 0x4B,

 

in defines.h the size rich very high:

 

3.8:

#define BufferSize_IC_1 6458

#define NumTransactions_IC_1    35

 

3.11 and 3.12.4

#define BufferSize_IC_1 10563

#define NumTransactions_IC_1    40

 

in xxx_IC1.h  five new block write commands are added with the same content

 

SIGMA_WRITE_REGISTER_BLOCK( DEVICE_ADDR_IC_1, REG_JACKREGISTER_IC_1_ADDR, REG_JACKREGISTER_IC_1_BYTE, R15_JACKREGISTER_IC_1_Default );

    SIGMA_WRITE_REGISTER_BLOCK( DEVICE_ADDR_IC_1, PROGRAM_ADDR_IC_1, PROGRAM_SIZE_IC_1, Program_Data_IC_1 );

    SIGMA_WRITE_REGISTER_BLOCK( DEVICE_ADDR_IC_1, PROGRAM_ADDR_IC_1, PROGRAM_SIZE_IC_1, Program_Data_IC_1 );

    SIGMA_WRITE_REGISTER_BLOCK( DEVICE_ADDR_IC_1, PROGRAM_ADDR_IC_1, PROGRAM_SIZE_IC_1, Program_Data_IC_1 );

    SIGMA_WRITE_REGISTER_BLOCK( DEVICE_ADDR_IC_1, PROGRAM_ADDR_IC_1, PROGRAM_SIZE_IC_1, Program_Data_IC_1 );

    SIGMA_WRITE_REGISTER_BLOCK( DEVICE_ADDR_IC_1, PROGRAM_ADDR_IC_1, PROGRAM_SIZE_IC_1, Program_Data_IC_1 );


    SIGMA_WRITE_REGISTER_BLOCK( DEVICE_ADDR_IC_1, REG_DSP_ENABLE_REGISTER_IC_1_ADDR, REG_DSP_ENABLE_REGISTER_IC_1_BYTE, R21_DSP_ENABLE_REGISTER_IC_1_Default );

Outcomes