I need to design a prescaler with HMC434 to operate frequency up to 2.5GHz sine and the amplitude is 5v vpp. Is it workable？
Can you clarify if your requirement is for input or output?
The HMC434 has a nominal input operating range for a sine wave of 200MHz to 8GHz. The input must not be driven with 5Vpp input, as this is outside of the recommended maximum rating of 15dBm input.
The output will be a square wave regardless of input waveform type. Output amplitude (into AC coupled 50 ohms) will be per datasheet plots.
Retrieving data ...