I want to convert my ended signal 0-5v to differential signal ±10v and vice versa, what is the best solution for that ? is there a board Prepared for this convertion ?
For the conversion of single-ended signal 0-5V to differential signal of +/- 10V, you could look into ADA4922-1. It has an input voltage range of +/-10.7V which can operate on your requirement of 0-5V. It also have an output voltage swing of +/-10.7V which can do your requirement of +/-10V output voltage. For the conversion of the differential to single-ended, you can look at an in-amp such as AD8422 . We do have available evaluation boards for both parts.
Some additional question; what will your application be? Do you have any other circuit requirement like bandwidth, package, slew rate, etc.? I could give you better recommendations for your application.
Thanks you richardcer for your answer,
my problem is to convet 16 input single-ended signal 0-5V to differential signal of +/- 10V and vice versa, so i need also to convert the differential signal of +/- 10V to the signal-ended 0-5V. What the best solution for my problem with sampling period 0.5ms and 12bits ? Is there a board predefined for this problem ? and please attach a photo shows your solution.
Do you have any block diagram or schematics for your application? Could you post it here?
Retrieving data ...