what is the actual power consumption of ADUM5230ARWZ if the VADJ keeps the PWM DUTY FACTOR at 30%
I spent some time on the bench and tested the supply current at different duty cycles by adjusting the upper and lower Vadjust resistors. I measure IDD1 of about 55mA at 30% duty cycle with no load. With a 2K VISO load, I measure about 78mA.
I need to set up a board with the ADuM5230 and measure the IDD1 current at 30% duty cycle to determine the power dissipation (assuming no added load for your application)?
Retrieving data ...