When trying to run the AD8336 on MC11 I got the error:
Error: Node GNEG from subckt AD8336 does not match any defined pin name for this part.
Does some one can help?
Jim is right! You are having pin ID association issue.
Based on your schematic below, you have different pin assignments as it was defined in the AD8336 model. In your simulation you have pins 1 2 3 4 5 6 7 8 9 10 11 but in the model it was GNEG GPOS INPN INPP PRAO PWRA VCOM VGAI VNEG VOUT VPOS, respectively. That is why the simulator is giving that error message.
Anyway, I have fixed the pin assignments and able to acquire transient analysis below (green:OUT, red:IN).
We are currently working with the AD8336 model since errors have been encountered by other users as well.
It sounds like you may have a pin ID association issue. We have a SPICE model expert in our group and I'm going to refer your inquiry to him to check text protocol. If you made the outline model you might want to attach it.
It is working now.
Retrieving data ...