Does anybody know the delay between RFout_A and RFout_B of ADF4355-2?
and..Is there a way to compensate it?
We measured the phase delay between the RFOUTA and RFOUTB to be approx. 26degrees...we set this up using our evaluation board configured to o/p 5995MHz/8 = 749.375MHz.
As the phase adjust will adjust both channels by the same amount, phase adjustment will need to be done externally...see the following page for our clock distribution devices...
Clock Distribution Devices | Analog Devices
We haven't measured the phase delay between RFOUTA and RFOUTB, I will use our EV-ADF4355SD1Z evaluation board to do this measurement and will send you the set-up and results, regards,
thank you Brigid ^O^
Retrieving data ...