Can the HMC1113 output an DC signal from IF pins while given RF and LO 10G sine wave but different phase? the change of this IFoutput value with respect to phase difference.Thank you!
HMC1113 can be used at lower IF frequency, however below 10MHz you will find that the noise floor will increase as well as the NF.
Please see below a plot of the noise floor below 10MHz, you can see that the 1/f noise will increase as the frequency will decrease
Thanks for your help.I need to detect phase difference of two 10G RF signals. Could you recommend a chip that can achieve such function?
Retrieving data ...