My customer request additional truth table of "HMC547LP3"
If both control input is all high and all low, how does it work?
Truth table of datasheet is not define this case
If you have any question, please let me know.
Hi MS. Cho,
The HMC547LP3E does not support all high or all low states for control A and B. The switch will be in undefined state when A = B = high or low (or floating).
S-parameter data attached to product web page includes the states in truth table and undefined states (see the link below). The typical response in undefined states is high insertion loss and poor return loss on both RF paths.
Retrieving data ...