I want to ask about Limited Range.
I used the "6-1e Port A, 720p,1080i Any Color Space In (YCrCb 444 24bit from ADV761x) Through HDMI Out 444 YCrCb VIC[4,5,19,20]:"
And changed OP_656_Range.
I proved Data15 to Data0(16bits).
At OP_656_RANGE = 1'b1 "limited"
At OP_656_RANGE = 1'b0 "Full"
The resister setting and the waveform look like the opposite.
I checked read the resister and checked I confirmed that I was set surely.
Also I input few types of the picture and checked that the prove point is correct.
Is the Software manual is wrong or something wrong about my Eval-Board or tool or something?
Or my measuring is wrong?