hi analog devices engineers.
Thank you for your reading my basic question.
I want to know the following question:
(1) Is the ADV7511 need to set the YCbCr 4:2:2 to output the data and how to set by hardware or software? Or is it default setting (YCbCr 4:2:2)
(2) what the range of the input clock and output clock of ADV7511 on Xilinx kc705 FPGA?
(3)And is the hdmi_en ,HSYNC and VSYNC low or high active
(4) Is the input signal including hdmi_en, HSYNC, VSYNC and hdmi_data
Could anybody help to answer the above question ?
Thank you &Best regards