Please advise on how to terminate the following ADV7401 input pins when not used:
DE_IN and DCLK_IN can weakly pulled low.
Output port pins can be left open or floating
P0-P1, P10-P11, P20-P21, P31-P40 are the Video Pixel Input Port.
Can these be left floating?
unused input pixel ports can be left floating.
For the unused pin AIN4-12 and SOY. Can they be shorted to GND if not used? The manual (PG21) mentions they can be shorted.
Is a weak pull down an option? Which do you recommend?
Strong pull downs (330 Ohms) are acceptable. DFT would require pull down resistors so you can test the solder joints.
For the unused pin AIN4-12 and SOY. Can they be shorted to GND if not used?
Retrieving data ...