I use the ARRadio，and want to use the ADI IIO Oscilloscope on Windows.But no iio devices found,Why?
First you should confirm that the network connection to the carrier board that the ARRadio card is attached to is working by pinging it or similar while Linux is up on the board and also make sure iiod is running on it as well.
If those two things check out you should be able to connect over the network to the IP address of the carrier board on IIO Oscilloscope and see iio devices assuming the drivers/sofware are the right versions.
Post moved to Linux Drivers.
A few days ago,after I assigned the target board a fixed IP address, connection between ARRadio
and the IIO Oscilloscope was successful. However, when I loaded the LTE10.ini profiles, an error occurred:Failded to configure the FIR filter using the selected file. In addition, I also tested
the LTE Transmitter and Receiver Example with the code——MATLAB Version LTE Transmitter and Receiver Example, there were some problems:
Attempt to reference field of non-structure array.
Error in ad9361_LTE (line 79)
Error in test (line 1)
Our FIR filter files are in the format of .ftr. You can find them in the following directory:
iio-oscilloscope/filters at master · analogdevicesinc/iio-oscilloscope · GitHub
When you are using the LTE5_MHz.ftr with the MATLAB example, please make sure this filter file is in the current folder or has been added to the path.
Retrieving data ...