@Hello, analog devices engineer
Thank you for your reading.
When I try to evaluate the ADV7511 chip in Xilinx Kc705 boad following the reference design.
But I failed to displaying the sample image in the monitor.
The following is my evaluate step.
(1)connect the FPGA and monitor with a HDMI cable.
(2)connect JTAG to the computer
(3)connect UART to the computer
2:power on the FPGA
3:open teraterm using com2 and set the baud rate as 115200
4:open EDK xilinx platform studio
(1) click menu project -> launch xilinx shell
(2)go to the install directory D:\program\14.7\ISE_DS\EDK\bin\nt64
(3)xmd -tcl evaluate.tcl
However, there is no display in nether monitor nor tera-term
Could anyone tell me the reason?
Thank you very much
Thank you & best guards