I use the Nios as the CPU to control the AD9361, when I compile AD9361 No OS Code for platform Altera, find some errors：No alt_bridge_manager.h and socal.h file.
The Arria II GX FPGA Development Kit is not one of our supported platforms, so the software will not work as it is. However, it shouldn't be hard to add support to platform_altera for it. Eventually, you can start from platform_generic and implement the generic functions.
Can you give us more details about your setup? The platform_altera was created for a a Cyclone V SoC board (SoCKIT) - the design didn't use a Nios 2 processor, just the dual-core ARM Cortex-A9 one.
I want to use the Arria II GX FPGA Development Kit and the ARRadio to realize An OFDM Transmitter and Receiver system, but the Arria II GX is not SOC FPGA, so I want to use the Nios soft processor to control the ARRadio. I try to compile AD9361 No OS Code for platform Altera in Nios ii Software Build tools for Eclipse, but find some errors:No such "alt_bridge_manager.h" and "socal.h" files. IS the AD9361 No OS Code for platform _altera not suit for Arria II GX FPGA?
When you say NIOS are you saying you are using the same SOC FPGA but added a NIOS soft processor or is this something with only the NIOS processor?
Your hand off contents are probably messed up. First try a simple (say lit LED) progam using your setup and it that works port AD9361. If that doesn't work, you should start with Altera support.
Retrieving data ...