I would like to know if it’s possible to use two ADF7023-J on two different PCB to track each other. I would have a "TX" board and a "RX" board. I want to trace the "TX" board without moving the "RX" board around (if possible) using the signal strengt and the "TX" board to send me its location or direction ("N", "S", "W", "E") so I can trace where it’s coming from and find it. The "TX" board will be attached to a moving target so this would be something like a tracking device. We already have the PCB and schematic design but we can't move on before knowing if this is actually possible.