Do you have specific instructions for getting this to work with the Mini ITX xc7z100? I tried the mini itx folder that exists in the image, but it does not boot. Thanks.
We don't have specific instructions for Mini ITX xc7z100.
Given that it's a different FPGA, you won't be able to program it with the same bit.
You can modify the mitx045 configuration:
hdl/projects/common/mitx045 at master · analogdevicesinc/hdl · GitHub
based on the board definition ps7.tcl for mitx100 (from 2014.2 board definitions Mini-ITX | Zedboard).
Add the correct FPGA (xc7z100ffg900-2 instead of xc7z045ffg900-2) in:
hdl/adi_project.tcl at master · analogdevicesinc/hdl · GitHub
After that, you should double check the pin assignments for the pins used in the design.
Retrieving data ...