Can you send me IBIS or IBIS-AMI for ADN4612 ?
Thanks a lot.
Is in the process of being posted to analog.com for download, but in the meantime:
The ADN4612 IBIS-AMI model can be found on our FTP server.
Here is the FTP site information:
Password: Analog2012 (This is case sensitive)
The user will find redrivermodels for both the ADN4612 Receiver and Transmitter.
A user guide for setting upthe model is provided in the folder.
You can use Filezilla toaccess the FTP server client site. It’s free software:
Thank you for IBIS-AMI model.
Can you send me the input EQ characteristic? Bode plot with different setups.
I have some questions about IBIS-AMI model of ADN4612.
I read the FFE section in ADN4612 datasheet and I found PC, D0-D6 taps.
So we can set 8 parameters (by software).
I found only D0, D1,D2 and D3 tap parameters in the TX AMI model (ADN4612_TX_PVT_Full.ibs).
- Where are the D4...D6 tap parameters?
- What are the KXPT and KTX parameters?
Thank you for your answer.
We want to use this crossopint to switch HDMI2.0 signals.
So I have to use min. Eye mask specification from HDMI2.0 standard ??
I downloaded different models from your sites.
Which one is the newest / best?
More questions, sorry.... but the ADN4612 IBIS-AMI example project is not a well-documenteted project.
I think these files contain the IC output informations:
I think these files contain the IC input informations:
When I opened these files I didn’t find any comment (header) on the begining of s4p file.
So I always have to put these files after TX and before RX when I simulate with these elements. Am I right?
What is the difference beetween rx_pkg_final.s4p and rx_pkg_peq0_final.s4p?
Retrieving data ...